E Y N A F N
)
To have your name and faxltelephone number (called the “Senders name” and
“Sendefs number”) printed at the top of every page you transmit. program them by
pressing the panel keys as shown below.
+ If you enter an Incorrect number or letter, press the HOLD key to move the
cursor back to the mistake, then enter the correct number or letter. (To movethe
cursor forward, press the SPEAKER key.)
1
m
Pressthe keys shown at left. “ENTRY
MODE” will appear in the display.
2
Press the “#” key 2 times. “OWN NUM-
BER SET” will appear in the display.
3
~-;:r},,Et:r
m
Press the START key.
4
Enter your fax number (max. of 20 dig-
its) by pressingthe number keys. (To in-
@@@ ~@@@ sertaspacebetween digits. pressthe
“#” key. To insert a “+”. press the “*”
(Example)
key.)
5
-:c.,,a;,,l.L
o
Pressthe S key.
o
6
m m
Enter your name by pressingthe appro-
ama
pnate number keys as shown on the fol-
lowing page. Press each key repeatedly
~~
until the desired letter appears Inthe dls-
m
play. (Max. of 24 characters.)
SPEAKER
@
mm
(Example: “SHARP”)
Press the START key and then the
STOP key.
2-4
I S
To Next Page
Loading...
