E L F N
Names are programmed by pressing the numeric keys. You WIIInotice that letters
are indicated above each of the number keys “2” through “9”. To enter a letter (or
number), press the appropriate key one or more times until the letter appears In the
display (the numberwill appear first, followed by the letters Inthe order indicated
above the key). The keys usedfor entering letters and editing are shown below.
Letters and numbers
To enter a letter or number, press
Space
the appropriate key repeatedly until
Press this key
the desired number/letter appears
twice to enter a
in the display (the number appears
rn~nn
first. then the letters in the order
I
shown above the key).
/
Delete
Symbols
Press either key repeatedly until the
desired symbol appears (see the
symbol list on the following page).
Press this key to movethe
cursor to the left.
Cursor right
Press this key to move the
cursor to the right.
● To enter two letters in succession which require using the same key, press the
SPEAKER key once afier entering the first letter, then enter the second letter.
. Tochange one Individualletter to another. move the cursor to that letter ~nd
enter the desired letter. Thenew letter will simply replace the old one.
I S
2
To Next Page
Loading...
