M
4
t m b f
If the memory becomesfull while
FULLwill appear inthe display.
Press the START/MEMORY key if you
entered a Speed Dial number or a full
number.
. The document ISfirst scanned and
stored In memory. The other machine
is then dlalled (redlalllng will be per-
formed automatically if necessary).
When the connection is made, trans-
mission begins. Afterwards, the docu-
ment is cleared from memory and your
fax returns to standby mode.
the document ISbeing scanned, MEMORY IS
Pressthe
S key if you want to transmit the pages which have
beenstored up to that point in memo~, The remaining pages will be ejected
from the feeder. After transmission. the memory will be cleared and you can
transmit the remaining pages. You will also need to transmit the page which was
being scanned when the memoryfilled up.
Pressthe STOP key if you want to cancel the entire transmission.
This is a back-upfunction which ISautomatically activated if your fax runs out of
paper or the pape”rjams.
When you have received a document [n memory, FAX RX IN MEMORYwill appear
in the display, alternating with OUT OF PAPER or PAPERJAMMED. When you
add paperor clear the paperjam. the stored documents will automatically be
printed out.
7-8
SPECIAL FUNCTIONS
To Next Page
Loading...
