A variety of optional settings are available which you can use to fine-tune your fax
to better suit your needs. The settings are made by pressing the panel keys, and
each setting is described in the list below.
1
Press the keys shown at left. “OPTION
FUNCTION
a
SETTING” will appear Inthe alsplay.
o
2
Move through the list of settings by
~ ‘r @
pressing “#” to move forward, or ‘w” to
move backward. The settings will ap-
pear in the order listed below.
3
When the desired setting appears in the
m
display, change It appropriatelyas de-
scribed below.
(Example)
4
o
0
Press the STOP key.
Setting 1: FINE RESOLUTION PRIORITY
This sets the default resolution (the resolution used If a setting ISnot madewith the
RESOLUTION key) for transmitting documents. Press
“ (YES) to set it to FINE. or
“2” (NO) to set it to STANDARD.
● Factory s “
Setiing 2: NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an incoming
call In FAX reception mode. Enter any number from “2” to “4”
● Factory setting: “2”
O S
8
To Next Page
Loading...
