Sharp FO-455

C
)
/
,
Connect the handset lead to the handset
~> [ “
and the fax as shown.
*J
/
>
. The ends of the handset lead are iden-
‘;/&b
ttcal. so they will go into either socket.
f
,/’
, \ <l
j,
Place the handset on the handset rest.
./
Use the handset to make ordinary phone calls, or
to transmit and receive documents manually.
E
Install the fax machine near an easily ac-
cessible power point 230-240 V, 50Hz,
Plug the power lead into a 230-240 V.
50 Hz, grounded (3-prong)AC outlet.
~
6* thepower,ead
. The fax does not have a power on/off
switch, so the power is turned on and
off by simply plugging or unplugging
● Caution: When disconnectingthe FO-
455, unplug the telephone line cord be-
fore unpluggingthe power lead.
For
Insert the small modular plug which ter-
minates the F080TP adaptor line cord
into the socket on the back of the fax
marked “TEL. LINE”, Plug the F080TP
adaptor into the telephone socket on the
wall,
c Be sure to plug the line cord into the
TEL. LINE socket on the fax. Do not
plug it into the TEL, SET socket.
For New Zealand
Note: If your area experiencesa high incidence oflightnlng orpowersurges, we
recommend thatyou install surgeprotectors for the power and telephone
lines. Surgeprotectors can be purchased at most telephone specialty stores.
1-2
INSTALLATION