EN-13
PRODUCT FUNCTIONS (F1-F6)
Function Setting
Light Control
You can select the brightness of the Display and
Cleanliness Indicator.
OFF
When set to “OFF”, the “Dim” light illuminates
for 8 seconds after operation starts and then the
light goes off.
However, some indicators that need notification
will remain dim.
Dim
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
• Room is bright: light is ON
• Room is dark: light is OFF
Even though the room is bright, the light will turn
off when operating in sleep mode.
Plasmacluster Ion ON/OFF
OFF
ON
(default)
Auto Restart
If the product is unplugged or if there is a power
failure, the product will resume operation with the
previous settings after power is restored.
Cancellation
ON
(default)
Adjusting sensor sensitivity (F4 - F6)
Light Sensor Low
Sensitive Dust Sensor Standard
(default)
Sensitive Odor Sensor High
To Next Page
Loading...
Need help?
General
