EN-14
Function Setting
Wi-Fi adapter
ON/OFF
1.
Select “ ” by following Steps 1 - 3 on page 12.
2.
Press "Switching Display" Button to select Setting " " or
" ".
Wi-Fi OFF Wi-Fi ON
♪♪
3.
Complete
NOTE
• When Setting number (“ ” or “ ”) is
changed, the square rotates on the display
until the setting is completed. When setting is
completed, “ ” is displayed.
Wi-Fi connection
with a router
(with the Wireless
LAN connection
Button)
1.
Select “ ” by following Steps 1 - 3 on page 12.
2.
After “ ” is displayed, press the Wireless LAN connection
Button of the router.
Light up
weak strong
Blink
Once connected, the receiver
level will be displayed.
A connection error is occuring if “ ” is displayed. Please confirm that the
router is operating correctly and try again.
3.
Complete
Initialization of
Wi-Fi function
1.
Select “ ” by following Steps 1 - 3 on page 12.
2.
After “ ” is displayed press “Mode” Button.
An error is occurring if “ ” is displayed. Please try again.
Complete
Blink
Initializing
3.
Complete
NOTE
• Please delete the device registration from the App
when initializing the air purifier which is already
connected to the Wi-Fi.
Wi-Fi FUNCTIONS (A1-A9)
To Next Page
Loading...
