Sharp HT-CN410DVH

E-20
HTCN410DVH 8_E2.fm03/10/29
ENGLISH
HT-CN410DVH
Preparation for Use
- Changing the setup menu -
Changing the setup menu (continued)
 Change the system with conventional TV connecting
 If you use a conventional TV, you must select the INTERLACE (i) mode from remote control direct button "I/P SCAN".
 INTERLACE mode is use for normal video output.
 For conventional TV connection, please refer to page 12.
 Change the system to a TV with Progressive-Scan
 If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 14), you must select the PROGRES-
SIVE-SCAN (P-SCAN) mode from remote control direct button "I/P-SCAN".
Notes:
 If you use a conventional TV and you select "P-SCAN" from remote control direct button "I/P-SCAN", the TV screen will become blur (not clear).
 P-SCAN mode only can activate if video output setting change to YP
B
P
R
mode.
 If Video Output setting is on SCART or S-VIDEO mode, P-Scan can't be activate, "STOP" (hand) sign will appear on TV screen when press "I/P-Scan" button on remote
control.
Setup menu Selectable parameters (*indicates default setting) Description
GENERAL SETUP TV DISPLAY 4:3 PS*
4:3 LB
16:9
The screen mode should be set according to the connected TV type
(for details, see page 22).
VIDEO OUTPUT SCART* Select "S-VIDEO" mode if connect DVD main unit (S-VIDEO output
socket) to TV (S-VIDEO input socket) (for details, see page 12).
Select "YP
B
P
R
" mode if connect DVD main unit (component video
output sockets, YP
B
P
R
) to TV (component video input sockets with
Progressive-scan capability) (for details, see page 14,15).
YP
B
P
R
S-VIDEO
ANGLE MARK ON*
OFF
OSD LANGUAGE ENGLISH*
FRENCH
GERMAN
ITALIAN
SPANISH
You can select the desired OSD (On Screen Display) language for
the setup menu or playback control screen.
SCREEN SAVER ON* A screensaver appears.
OFF The screensaver is disabled.
SPEAKER SETUP CENTER DELAY 1 MS to 5 MS
OFF*
Adjust the delay time of the speakers (for details, see page 47).
REAR DELAY 3 MS to 15 MS
OFF*
TEST TONE ON
OFF*
You can check the sound output from the speakers (for details, see
page 48).
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
Caution:
Make sure the unit is on the STOP condition before changing the interlace or P-Scan (Progressive Scan) mode.
(*2) What is DivX
®
VOD?
DivX
®
Video-on-Demand (VOD) is a digital video for internet delivery service that allows you to download and enjoy high-quality video content from a diverse group of
DivX
®
content partners to a CD and play it on SHARP's HT-CN410DVH DivX
®
certified DVD player.