Sharp HT-CN410DVH

E-16
HTCN410DVH 8_E1.fm03/10/29
ENGLISH
HT-CN410DVH
System Connections
- Connections to TV, VCR, etc. -
Connections to TV, VCR, etc. (continued)
To listen to TV or VCR sound via the speakers of this unit:
 Audio connection to other equipment
 Connecting to a TV with SCART socket
 Connecting to the AC power Lead
Note:
Unplug the AC power lead from the wall socket if the unit will not be used for a pro-
longed period of time.
Press the FUNCTION button repeatedly to select the desired audio in-
put.
Unit display
 For the TV, select "TV
IN".
 For the VCR, select
"AUX IN".
Notes:
 Change the TV input in accordance with the connected socket.
 Do not connect other equipment (VCR, etc.) between the TV and this unit. Pic-
tures may be distorted.
 Refer to the operation manual of the equipment to be connected.
 Insert the plugs fully to avoid fuzzy pictures or noise.
FUNCTION
(TV) or (AUX)
A-B REPEAT 1SLEEPPROGCHPESET
KHz
MHz
A-B REPEAT 1SLEEPPROGCHP
E
SET
KHz
MHz
Audio signal
Audio cable (not supplied)
MD player
SCART cable
(supplied)
To SCART
input socket
Video/Audio signal
SCART IN
TV
Wall socket
(AC 230 V, 50Hz)