Sharp HT-CN410DVH

E-22
HTCN410DVH 8_E2.fm03/10/29
ENGLISH
HT-CN410DVH
Preparation for Use
- Changing the setup menu -
Changing the setup menu (continued)
 TV display setting
Note:
When playing the disc with a fixed video format, it will not change even if the TV screen
size is changed.
 TV type setting
 Language setting
Indicator Setting
4:3 PS When playing a wide image (16:9) disc,
the left and right sides of the image are
cut (pan scan) to display a natural-look-
ing 4:3 size image.
A wide image disc without pan scan
is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
4:3 LB When playing a wide image (16:9) disc,
black bands are inserted at the top and
bottom and you can enjoy full wide
images (16:9) on a 4:3 size TV.
A 4:3 disc is played in 4:3.
16:9 A wide image (16:9) is displayed when
playing a wide image (16:9) disc.
 When playing a 4:3 image disc, the image size depends on the
setting of the connected TV.
 If you play back a wide image (16:9) disc with this unit connected
to a 4:3 TV, the vertically shrunk image is displayed.
Indicator Setting
MULTI Select this mode for the multi-system TV.
NTSC Select this mode for the NTSC TV.
PAL Select this mode for the PAL TV.
Indicator Setting
OSD LANGUAGE A language for screen display can be set for the setup menu,
messages, etc.
AUDIO A language for audio can be set.
You can specify a language for conversation and narration.
SUBTITLE A language for subtitle can be set.
The subtitles are displayed in a specified language.
DISC MENU A language for disc menus can be set.
Menu screens are displayed in a specified language.
English French
DISC LOADING DISQUE CHARGEMENT
English French
Thank you
Merci
English French
Merci
Thank you
English French
ACTEURS
PERSONNEL
CAST
STAFF