E-53
HTCN410DVH 8_E2.fm03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier (HT-CN410DVH)
DVD player
Tuner
Front speakers
Power source AC 230 V, 50 Hz
Power consumption Power on: 45 W
Power stand-by: 0.6 W
Dimensions Width: 428 mm
Height: 55 mm
Depth: 360 mm
Weight 3.8 kg
Audio input terminals Analogue input (IN 1): RCA type × 1 pair (L/R)
Analogue input (IN 2): RCA type × 1 pair (L/R)
Audio output
terminals
Analogue output (OUT): RCA type × 1 pair (L/R)
Headphones: 16-50 ohms (recommended: 32 ohms)
Digital output: Coaxial type × 1
Video output
terminals
S-video output: S-terminal × 1
Video output: RCA type × 1
Component video output: PR, PB, Y
Audio and Video
output terminals
SCART output: SCART terminal × 1
Output power Front speakers:
RMS: 42 W (21 W + 21 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 21 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 42 W (21 W + 21 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 45 W (10 % T.H.D., 100 Hz)
Signal system PAL/NTSC colour
Supported disc types DVD (with the same region number on the back of the unit
or ALL), SVCD, VCD, audio CD, CD-R, CD-RW, MP3
Video signal Horizontal resolution: 525 lines
S/N ratio: 56 dB
Audio signal Frequency characteristics Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio CD: 65 dB (1 kHz)
Dynamic range Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic distortion
ratio
0.2 % maximum
Frequency range FM: 87.5 - 108 MHz
AM: 531 - 1602 kHz
Type Full range speaker system (magnetic shield)
7 cm speaker
Maximum input power 30 W
Impedance 4 ohms
Dimensions Width: 90 mm
Height: 110 mm
Depth: 100 mm
Weight 0.46 kg/each