Sharp HT-CN410DVH

E-25
HTCN410DVH 8_E2.fm03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
DVD Operation
- DVD playback -
DVD playback
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. accord-
ingly.
 Playback
Note:
During operate FM/AM/TV/AUX mode, function is change to DVD mode automatically
when press OPEN/CLOSE or PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 When the input is not set to the disc mode,
press the FUNCTION button repeatedly to
display the startup screen.
The startup screen appears.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc position.
5 Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY ( ) button.
6 If playback does not start in step 5, press the PLAY ( ) button.
NO DISC
Disc tray
Label side