E-14
1. Open the battery cover.
2. Insert the battery according to the
terminal indicated in the battery
compartment. When inserting
or removing the battery, push it
toward the (–) battery terminals.
3. Close the cover.
Caution:
● Replace all old batteries with new
ones at the same time.
● Do not mix old and new batteries.
● Remove the battery if the sound
bar will not be used for a long
period of time. This will prevent
potential damage due to battery
leakage.
● Do not use rechargeable battery
(nickel-cadmium battery, etc.).
● Installing the battery incorrectly
may cause the sound bar to
malfunction.
● Batteries (battery pack or
batteries installed) shall not be
exposed to excessive heat such
as sunshine, re or the like.
Notes concerning use:
● Replace the batteries if the
operating distance is reduced or
if the operation becomes erratic.
Purchase 2 “AAA” size batteries
(UM/SUM-4, R03, HP-16 or
similar)
● Periodically clean the transmitter
on the remote control and the
sensor on the sound bar with a
soft cloth.
● Exposing the sensor on the
sound bar to strong light may
interfere with operation. Change
the lighting or the direction of the
sound bar.
● Keep the remote control away
from moisture, heat, shock, and
vibrations.
The remote control can be used
within the range shown below:
Remote control
Battery installation
Remote sensor
Test of the remote control
To Next Page
Loading...
Need help?
General
