E-27
Periodically wipe the cabinet with a
soft cloth.
Caution:
● Do not use chemicals for cleaning
(petrol, paint, thinner, etc.). It may
damage the cabinet nish.
● Do not apply oil to the inside of
each component. It may cause
malfunctions
When you fail to perform operations
properly, the following messages are
displayed.
Note:
Should the same indicator appears
even if the sound bar is unplugged
and plugged in, or is set to the
standby mode and on again,
contact your local dealer where you
purchased the sound bar.
On
sound bar
Meaning
Power
indicator
blinks red.
● When the
protection circuit is
activated.
● When there is no
compatible sound
input.
Maintenance
Cleaning the cabinet
Error indicators and
warnings
To Next Page
Loading...
Need help?
General
