E-19
1. Ensure that the sound bar is
connected to the TV or audio
device.
2. While in power on mode, press
the button on the sound bar
or remote control repeatedly to
select the desired mode.
3. Operate your audio device
directly for playback features.
4. Press the + or – button to adjust
the volume to your desired level.
Note:
While in HDMI ARC or OPTICAL
mode, if there is no sound output
from the sound bar and the HDMI
ARC or OPTICAL indicator blinks
quickly, you may need to activate
PCM signal output on your source
device (E.g. TV, DVD or Blu-ray
player).
First time you connect your Bluetooth
device to this sound bar, you need to
pair your device to this sound bar.
Notes:
● The operation range between this
sound bar and a Bluetooth device
is approximately 8 meters (without
any object between the Bluetooth
device and the sound bar).
● Before you connect a Bluetooth
device to this sound bar, ensure
you know the device’s capabilities.
● Compatibility with all Bluetooth
devices is not guaranteed.
● Any obstacle between this sound
bar and a Bluetooth device can
reduce the operation range.
● If the signal strength is weak,
your Bluetooth receiver may
disconnect, but it will re-enter
pairing mode automatically.
● Bluetooth pairing from your device
to this sound bar can be done
during stand by and power on
mode at all functions. However,
Bluetooth playback from the
source device is applicable at
Bluetooth function only.
AUDIO IN / OPTICAL /
HDMI ARC
Bluetooth operation
Pair Bluetooth-enabled
devices
WHITE In HDMI mode
GREEN In Audio In mode
ORANGE In Optical In mode
To Next Page
Loading...
Need help?
General
