E-10
System connection
Caution:
Turn off all other equipment before making any connections.
Notes:
● To connect to TV/player, use HDMI ARC, AUDIO IN or OPTICAL IN
terminals located at the rear of the sound bar.
● Refer the operation manual of the equipment to be connected.
● Fully insert the plugs to avoid fuzzy pictures or noises.
● If the TV volume is continuously at low level, the sound bar will
automatically power off. Increase the TV output volume to enjoy the sound
from the system.
● If the TV volume is continuously at low level, the sound bar will
automatically power off. Increase the TV output volume to enjoy the sound
from the system.
● To avoid desynchronised audio and video when using an external player,
connect the output signal from the player to TV and the audio output (from
TV) to the sound bar.
To Next Page
Loading...
