Sharp HT-SB116 User Manual

E-11
The ARC (Audio Return Channel)
function allows you to send audio
from your ARC- compliant TV to
your sound bar through a single
HDMI connection. To enjoy the
ARC function, please ensure your
TV is both HDMI-CEC and ARC
compliant and set up accordingly.
When correctly set up, you can use
your TV remote control to adjust the
volume output (VOL +/- and MUTE)
of the sound bar.
● Connect the HDMI cable (not
included) from the sound bar’s
HDMI (ARC) terminal to the
HDMI (ARC) terminal on your
ARC compliant TV. Then press
the remote control to select HDMI
ARC.
Notes:Notes:
● Your TV must support the HDMI-
CEC and ARC function. HDMI-
CEC and ARC must be set to On.
● The setting method of HDMI-CEC
and ARC may differ depending
on the TV. For details about ARC
function, please refer to your TV
owner’s manual.
● Only HDMI cables of version 1.4
or higher can support the ARC
function
● 270 degree HDMI L-shaped
adaptor (commercially available)
with length 23mm or less is
recommended for wall mount
installation as shown below.
HDMI (ARC)
USB
AUDIO
IN
OPTICAL
IN
HDMI (ARC)
 HDMI ARC input
System connection (continued)
HDMI (ARC)
USB
AUDIO
IN
OPTICAL
IN
< 23mm
270 Degree HDMI adaptor

Sharp HT-SB116 Specifications

General

Brand	Sharp
Model	HT-SB116
Category	Speaker System
Language	English