Falling prevention
z Safety wires (not supplied) are useful to prevent the sound bar from falling off.
z 2 persons are required to perform this procedure.
When mounting on the wall
1 Loop the safety wires (not supplied) into each
hole of the wall mount angle as shown.
Wall surface
2 Loop the safety wires from wall mount angle
into each hole of sound bar as shown.
Wall surface
3 Align and x the sound bar to wall mount angle.
Wall surface
4 Tie the safety wires tightly.
Wall surface
When placing on the shelf/table
Loop the safety wires (not supplied) into each hole as shown
and tie the safety wires to the LCD TV stand.
To Next Page
Loading...
