EasyManuals Logo

Sharp HT-SB602 User Manual

Sharp HT-SB602
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
E-2
EN
Precautions
General
z Keep your equipment at least 10 cm of free space
along the sides, top and back for proper ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm10 cm
z Use the unit on a rm, level surface free from vibra-
tion.
z Keep the unit away from direct sunlight, strong mag-
netic elds, excessive dust, humidity and electronic/
electrical equipment (home computers, facsimiles,
etc.) which generate electrical noise.
z Do not place anything on top of the unit.
z Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low tem-
peratures.
z If the unit does not work properly, unplug and plug it in
again. Than turn on the unit.
z In case of an electrical storm, unplug the unit for
safety.
z Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
z The AC power plug is used as a disconnect device
and shall always remain readily operable.
z Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
z The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
z No naked ame sources, such as lighted candles,
should be placed on the apparatus.
z Attention should be drawn to the environmental aspects
of battery disposal.
z This unit should only be used within the range of 5°C -
35°C (41°F - 9F).
z The apparatus is designed for use in moderate cli-
mates.
z SHARP is not responsible for damage due to improp-
er use. Refer all servicing to a SHARP authorised
service centre.
Warnings:
z The voltage used must be the same as that specied
on this unit. Using a higher voltage is dangerous and
may result in a re or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from such usage.
z In case of repairing, please bring the entire system set
to the service centre.
Volume control
The sound level at a given volume setting depends on
speaker efciency, location and various other factors.
It is advisable to avoid exposure to high volume levels,
which occurs whilst turning the unit on with the volume
control setting up high, or whilst continually listening at
high volumes.
Controls and indicators
Sound Bar Front Panel
1
3 4 5 76 8 9
2
Page
1. Left Channel Speakers
2. Right Channel Speakers
3. On/Standby Button ..............................................11
4. INPUT Button ........................................................12
Page
5. Pairing Button ......................................................11
6. Remote Sensor ..................................................... 11
7. Sound Mode Button .............................................12
8. Volume Down Button ...........................................12
9. Volume Up Button ................................................12

Other manuals for Sharp HT-SB602

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp HT-SB602 and is the answer not in the manual?

Sharp HT-SB602 Specifications

General IconGeneral
Audio decodersDTS
RMS rated power310 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Number of tweeter drivers2
Soundbar speaker RMS power160 W
Number of mid-range drivers4
Subwoofer locationSeparate
Subwoofer connectivityWireless
Receiver includedNo
Product colorBlack
Recommended usageTV
Apple docking compatibilityNot supported
Size (imperial)60 \
Audio (L/R) in1
Connectivity technologyWired & Wireless
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Subwoofer depth306 mm
Subwoofer width144 mm
Subwoofer height430 mm
Main unit dimensions (WxDxH)1384 x 68 x 73 mm

Related product manuals