E-13
General control (continued)
APC (Auto Power Off Control)
This sound bar can be set to turn off automatically if no
signal is detected. (Except Bluetooth function)
1. Press the APC button repeatedly to select the time.
2. The sound bar will enter the power standby mode
automatically if no signal is detected after the preset
time has elapsed.
Auto detect signal
During standby mode, the unit will automatically power
on if it detects audio signal from AUDIO IN or OPTICAL
IN terminal.
Auto power off function
The unit will enter standby mode if:
BLUETOOTH:
• No connection after approximately 1 minute.
• In the pause or stop mode and no incoming signal
from device after approximately 1 minute.
Audio Return Channel (ARC)
The audio return channel (ARC) function enables an
HDMI ARC-capable TV to send the audio stream to the
HDMI OUT socket of the receiver. To use this function,
you must select the TV ARC input and your TV must sup-
ports the ARC.
3D sound mode
S+ 3D technology creates 3D sound through speak-
ers regardless of the type of sound source, whether it
is monaural, stereo or multichannel. It simulates sound
transmission characteristics using digital signal process-
ing to create a widening effect on the sound in the ambi-
ent space around the sound source.
By using this technology, multichannel surround sound
can be produced from 2.1ch source.
Press the 3D AUDIO button repeatedly to select:
Sound effect that emphasizes 3D
sound.
Sound effect that maintains the 3D
sound and improve vocal clarity.
3D sound effect off.
This product incorporates decoders supporting the Dol-
by Digital system and DTS system.
DTS (Digital
Theatre
Systems)
One of the digital audio systems for
theatrical use. As the sound quality
is emphasised, you can enjoy the
realistic sound effect in the home
theatre system.
Lights up when detecting DTS signal.
Dolby Digital One of the digital audio systems for
theatrical use. You can also enjoy
the stereophonic effect in the home
theatre system.
Lights up when detecting Dolby Digital
signal.
PCM
(Pulse Code
Modulation)
This is a general term for digitally
encoded audio signals on a CD or
DVD.
This sound bar lets you enjoy playback
of digital signals from sources such as
CD or DVD.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
