Sharp IQ-8920 - Configuring Fields

3.
Select FILE NAME. The FILE NAME window opens.
4.
5.
6.
Configuring
fields
1.
2.
3.
k+Xurrent
file
name
Press Ial (%@ to clear the current name.
Enter the new name (up to 10 characters).
Letters, numbers, and symbols can all be entered.
Touch -1 to store the new name.
(Or -1 to cancel any changes and leave the
original file name.)
If you do not want to change the number of entry fields,
skip steps 1-6 below.
Press (TEL) or (-1 to open the application that
you want to set up the fields in.
Press (m) , touch Il\rlODIFYI , and select one of the
three CONFIGURE menus.
The CONFIGURE submenu appears.
Select FILE NAME. The FILE NAME window opens.
134