Sharp IQ-8920 - The Scrapbook Application

To open the second tools menu, touch MORE TOOLS
and select ENABLE/DISABLE ALARM.
The ENABLE/DISABLE ALARM submenu opens. The
setting in effect is indicated by an asterisk.
2. Select DISABLE ALL ALARMS.
0 disappears from the display. All alarms are turned off,
i.e. no audible alarm will sound, until you use the above
procedure to turn them on again by selecting ENABLE
ALL ALARMS. However, the display will still indicate
when each alarm reaches its set time, even when the unit
is turned off.
*r
You can also press (2nd) I,) to enable/disable all
alarms.
The Scrapbook Application
The unit’s Scrapbook makes it possible to draw maps,
create illustrations, or make a quick note by writing
directly on the display. The drawings can then be pasted
into entries in the Tel and User File applications, and
become part of those databases (see p. 126).
IGF
Graphic entries take up a lot more space in the unit’s
memory than text entries, so it is a good idea to delete
those graphic entries you do not need, or copy them to a
RAM memory card.
190