Sharp IQ-8920

Points to Remember When Using Peripherals
When using IC cards formatted for units other than
8900/9000 Series:
l Cards that are 3.4 mm thick, such as the IQ-780s and
application cards of the IQ-775/lQ-776 format, cannot
be used with this unit. Forcing these cards into the
unit may cause damage.
l The IQ-709A, IQ-72’1 and IQ-8802 cards cannot be
used with this unit.
l The following keys on this unit cannot be used (refer to
the IC card operation manual as regards the other
keys):
[SCRAPBOOK] (G] (SEND) (GV$ (D A TE sm4h~P]
[P RINT SCREEN) [KGRq (CUT) (MENU)
l The vl key mentioned in IC card operation
manuals is re resented b the C2ndj key on this unit.
Ekl&
Also, the SHIFT FUNCTION key operation is
performed by pressin
the (SHIFT/ (OPT10
C2nd) then touching m, and
operation by pressing (2nd)
m. The displays for these operations might be
different from those in the IC card manuals.
l To transfer data from a card, first select card memory,
m. To transfer data from the unit,
touch 1 PERIPHERALS 1 after
selecting any application on the unit. To use the
Memory Check or Data Deletion functions with a card,
first select card memory then press i2ndj (w) .
l You cannot move the cursor by touching the IC card
window and you cannot highlight text in it by dragging.
Use the cursor keys to move the cursor.
l When using the IQ-702A, IQ-704B, IQ-71 1 B, IQ-712B,
IQ-715A, IQ-716B, IQ-8DOlA, you can enter data in the
clipboard by pressing [2ndj I%%%). However, you
cannot enter data in the clipboard if the amount of free
memory is small.
l The following cards can be used in conjunction with
most of the unit’s built-in applications. Press [m)
[m) to access these dictionaries while using a
274