2008-03-14
LC-32A28L, LC-42A48L
5
[2] OPERATION MANUAL
Remote control unit
1 POWER: Switch the power on or enters standby mode.
2 0–9: Set the channel.
3 • (DOT):No function.
4 SURROUND: Display the surround setting menu.
5 FREEZE: Set the still image. Press again to return to normal screen.
6 SLEEP: Allows you to set a time when the TV automatically switches to
standby. This display will disappear after a few seconds, and the sleep
timer automatically starts counting down.
• If you want to adjust the sleep timer again, you can press this button
repeatedly then change the time setting.
• The TV will enter the standby mode when the remaining time reaches
zero.
7 EXIT: Turn off the menu screen.
8 CC: Display captions during closed-caption source.
9 AUDIO: Display the MTS/SAP setting menu.
10 FAVORITE CH:
A, B, C, D: Select 4 preset favorite channels in 4 different categories.
(See page 23 for details.) While watching, you can toggle the selected
channels by pressing A, B, C and D.
11 DISPLAY: Display the current channel (or input source) information
on the screen.
12 INPUT: Select a TV input source.
13 MUTE: Mute the sound.
14 VOL +/-: Set the volume.
15 CH ^/v: Select the channel.
16 ENT: Jumps to a channel after selecting with the 0–9 buttons.
17 FLASHBACK: Press to switch to the previously tuned channel. Press
again to switch back to the currently tuned channel.
18 MENU: Display the menu screen.
19▲/▼/◄/► ENTER: Select a desired item on the screen.
20 RETURN: Return to the previous menu screen.
21 VIEW MODE: Select the Picture Mode.
22. AV MODE: Select an adjusted picture settings. (Standard, Movie,
Power Saver, User, Sports)
To Next Page
Loading...
