Lock one or more connected devices
Disable the specific external input signals.
Enter your password to access the 1. Parental
menu.
Press 2. <> to select Input Block and press OK
or ≥ to enter the input source list
Press 3. <> to select one or more input source.
Press 4. OK to lock or unlock your selected input
source.
Follow the on-screen instructions to exit.5.
NOTE
If you switch to the locked input source, you will be •
prompted to enter your password. (If your password is
correct, the locked input source will be unlocked before
the TV restarts from standby.)
If your country selection is • Italy (see page 7 “Step 2:
Country setting”), you will be prompted to enter your
password every time you access each blocked input
source.
Set / Change password
Enter your password to access the 1. Parental
menu.
Press 2. <> to select Set Password and press
OK or ≥ to enter.
Enter your new password in the 3. New box by
using the digit buttons on the remote control.
Enter your new password again in the 4. Confirm
box.
When complete, the TV reruns to the 5. Parental
menu.
Repeat step 1 to 4 to change password.6.
Clear all parental settings
Reset all the settings in the Parental menu.
Enter your password to access the 1. Parental
menu.
Press 2. <> to select Clear All and press OK or
≥ to enter.
Select 3. OK and press OK on the remote control
to clear all parental settings.
NOTE
If parental settings are cleared, you do not have to enter •
password to access Channels in the TV menu.
Eco
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Press 1. MENU on the remote control and select
Eco and press OK or ≥ to enter.
Press 2. <> to select On or Off and press ≥ to
activate the selection.
Follow the on-screen instructions to exit.3.
TV menu
To Next Page
Loading...
Need help?
General