Sharp LC-32LE700E User Manual

LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
4 – 12
11. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (46 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws ,16 lock screws and detach the Bezel Ass’y .
2. Remove the 4 Clip and detach the 46” LCD Panel HIRAKI Unit and Panel Chassis Ass’y .
3. Detach the Optical Sheet and Lens Sheet and Diffusion Plate .
4. Remove the 29 Push Rivets and 11 Support Pins and detach the Reflection Sheet .
5. Remove the 66 Push Rivets .
6. Remove the 11 Terminators and 22 connections and detach the 6 LED8 PWB1 Units , 5 LED8 PWB2 Units .6 LED6 PWB1 Unit
and 5 LED6 PWB2 Unit .
7. Detach the 6 LED5 PWB1 Units and 5 LED5 PWB2 Units .
8. Disconnect the connecting cords from the 11 connectors of the LED5 PWB1/2 Unit.
9. Detach the Back Light Chassis .
10.Detach the 2 Connecting Cord and 2 Ferrite Core .
11.Remove the 6 lock screws and detach the LCD Control Unit .
䎔䎜
䎔
䎕
䎗
䎖
䎘
䎙
䎛
䎔䎓
䎔䎕
䎔䎛
䎔䎚
䎔䎗
䎔䎗
䎔䎘
䎔䎖
䎔䎙
䎕䎕
䎗䎙䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎃
䎫䎬䎵䎤䎮䎬䎃 䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎃䎤䏖䏖䎊䏜
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈
䎚
䎲䏓䏗䏌䏆䏄䏏䎃䎶䏋䏈䏈䏗
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈
䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎃䎸䏑䏌䏗
䎦䏏䏌䏓
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎕䎗
䎕䎖
䎜
䎔䎔
䎕䎓
䎕䎔
䎕䎘
䎕䎙

Sharp LC-32LE700E Specifications

General

Display diagonal	32 \
Native aspect ratio	16:9
Native refresh rate	100 Hz
RMS rated power	20 W
Number of speakers	2
PC in (D-Sub)	Yes
HDMI ports quantity	4
USB 2.0 ports quantity	1

Weight and Dimensions

Depth (without stand)	92 mm
Width (without stand)	767 mm
Height (without stand)	502 mm
Weight (without stand)	13500 g