Sharp LC-32LE700E User Manual

LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
5 – 10
4) Volume fixed [VOLUME FIXED]
5) Volume fixed level [VOLUME FIXED LEVEL]
6) Remote control operation [RC BUTTON]
7) Main Unit Operation [PANEL BUTTON]
Option “VARIABLE”, “FIXED”, “ACCTRL” or “AC/RCCTRL” (loop enabled)
Default “VARIABLE”
Function • VARIABLE
•FIXED
• AC CTRL
• AC/RC CTRL
: The volume is not fixed.
: The volume is fixed to the value adjusted in the volume fixed level.
: The unit starts at the volume specified in the volume fixed level,
when power is turned on in the case of the AC-ON only.
: The unit starts at the volume specified in the volume fixed level,
when power is turned on in any case.)
(AC->ON, remote control->ON, main utit's key->ON)
Exception • In the adjustment process, the volume can be set to any level regardless of this setting.
Key disabled in setting
to FIXED
• VOLUME UP/DOWN (VOL+/-) [both remote control and main unit]
• MUTE (MUTE) * The main unit’s keys for the menu operation are enabled.
Remarks • [MAXIMUM VOLUME] has priority to “VOLUME FIXED”
* In setting to FIXED, Maximum volume is fixed.
• The volume of the headphones or monitor output is fixed.
• in setting to “FIXED”, the volume is not displayed in operating Disabled key
Option 0~60(loop disabled)
Default 20
Function The volume is fixed to the adjusted value (the main unit’s speaker only).
Exception • In the adjustment process, the volume can be set to any level regardless of this setting.
Remarks • When “VARIABLE” is selected in VOLUME FIXED, the setting cannot be selected and changed.
• VOLUME can be abbreviated to VOL.
Option “RESPOND”, “NORESPOND” or “LIMITED” (loop enabled)
Default “RESPOND”
Function The operation of the remote control’s keys is set.
• RESPOND
• NO RESPOND
• LIMITED
: the remote control’s keys in the normal state are enabled.
: the remote control’s keys in the normal state are disabled.
The POWER key (RECEPTION/STANDBY key) is also disabled.
: only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled.
(POWER, VOLUME ( / ), CHANNEL ( / ), LIGHT CONTROL (BRIGHT-
NESS SENSOR) BROADCAST SELECT)
Exception • In the adjustment process mode, inspection mode or hotel mode keys are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the adjustment process mode, inspection mode or
hotel mode.
Remarks The enable keys in setting to “LIMITED” are depended on keys of controller for hotel.
It is different accordinf to region.
Option “RESPOND” or “NORESPOND” (loop enabled)
Default “RESPOND”
Function The operation of the remote control’s keys is set.
• RESPOND
• NO RESPOND
: The main unit’s keys are enabled.
: The main unit’s keys are disabled excluding the POWER key
(RECEPTION/STANDBY key).
Exception • The start operation in the adjustment process mode, inspection mode or hotel mode are enabled regardless of this
setting.
• All the keys are enabled regardless of this setting while entering the adjustment process mode, inspection mode or
hotel mode.
• For the main unit’s MENU key, menu operation is possible regardless of the setting during the initial setting when
the power is turned on for the first time.

Sharp LC-32LE700E Specifications

General

Display diagonal	32 \
Native aspect ratio	16:9
Native refresh rate	100 Hz
RMS rated power	20 W
Number of speakers	2
PC in (D-Sub)	Yes
HDMI ports quantity	4
USB 2.0 ports quantity	1

Weight and Dimensions

Depth (without stand)	92 mm
Width (without stand)	767 mm
Height (without stand)	502 mm
Weight (without stand)	13500 g