Sharp LC-46LE925E User Manual

LC-46/60LE925E
2 – 2
Remote control unit
1 TV (Standby/On)
2ATV
Press to access conventional
analogue TV mode.
DTV
Press to access digital TV mode.
SAT
Press to access satellite mode.
RADIO
DTV/SAT: Switch between radio
and data mode.
• When only data broadcasting
(no radio broadcasting) is
transmitted by DVB, the radio
broadcasting will be skipped.
3 AQUOS LINK buttons
If external equipment such as a
AQUOS BD player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons.
4 CONTROL
Press to display the panel to
operate some functions on the
screen.
5 TIME SHIFT
(READY/ / / )
Press to temporarily record a
programme you are watching if you
want to interrupt a programme to
answer a phone call, for example.
6 Numeric buttons 0-9
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
• When the five Nordic countries
(Sweden, Norway, Finland,
Denmark or Iceland) are selected
in the country setting from
“Auto installation”, DTV
services are four digits. When
another country is selected, DTV
services are three digits.
7 (Flashback)
Press to return to the previously
selected channel or external input.
8 (Sound mode)
Select a sound multiplex mode.
(Wide mode)
Select a wide mode.
6
7
5
4
3
8
9
10
12
13
14
11
2
116
15
17
18
19
20
21
22
23
24
9(Mute)
TV sound on/off.
10
Increase/decrease TV volume.
11 MENU
“Menu” screen on/off.
12 3D
Select between 3D and 2D image
viewing.
13 (Cursor)
Select a desired item.
OK
Execute a command.
ATV/DTV/SAT: Display “CH list”
when no other “Menu” screen is
running.
14 END
ATV/DTV/SAT: Exit the “Menu”
screen.
NET: Return to the start page.
15 NET
Press to access Net TV.
16 (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen.
P. INFO
Press to display programme
information transmitted through
digital video broadcasting (DTV/
SAT only).
17 (INPUT)
Select an input source.
18 AV MODE
Select a video setting.
ECO (Standard/Advanced/Off)
Select “Energy save” setting.
19 (Teletext)
ATV: Display analogue teletext
DTV/SAT: Select MHEG-5 or
teletext for DTV/SAT.
20
ATV/DTV/SAT: Select the TV
channel.
NET: Scrolls pages up/down.
21 EPG
DTV/SAT: Display the EPG screen.
22 (Return)
ATV/DTV/SAT: Return to the
previous “Menu” screen.
NET: Return to the previous page
(This may not function for some
services).
23 Buttons for useful operations
(Subtitle)
Switch subtitle languages on/off.
(Reveal hidden teletext)
(Subpage)
(Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
24 R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.,
EPG, MHEG-5, teletext).
+/- (Volume)
///
P/

Sharp LC-46LE925E Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	46 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	100 Hz
LED backlighting type	Edge-LED
Viewing angle, horizontal	176 °
RMS rated power	20 W
Number of speakers	2
PC in (D-Sub)	-
HDMI ports quantity	4
DVI-D ports quantity	0
Common interface (CI)	No
USB 2.0 ports quantity	1
Common interface Plus (CI+)	Yes
Consumer Electronics Control (CEC)	Aquos Link
Product color	Black
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.2 W
Power consumption (typical)	95.1 W
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T

Weight and Dimensions

Depth (with stand)	340 mm
Height (with stand)	785 mm
Weight (with stand)	45000 g
Depth (without stand)	39 mm
Width (without stand)	1127 mm
Height (without stand)	734 mm