EasyManuals Logo

Sharp LC-60LE822E User Manual

Sharp LC-60LE822E
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
LC-60LE822E/LC-60LE822ERU
7 – 10
[External input EXT2] No picture on the display (8)
Does not the picture of the CVBS signal input to EXT2 go out?
Is a CVBS signal input to pin (3) of EXT8 (J505)? NO Check the setting of an external input device that connects with
EXT2.
YES
Is CVBS signal sent to pin (AE29/CVBS_IN) of IC3302? NO Check the line between J505 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT3] No picture on the display (9)
Does not the picture of the component video signal input to EXT3 (15pin-D-SUB terminal) go out?
Is it selected “Component” by the Audio setup under Menu-
Setup-Option-Input terminal setting - Input select?
NO Set the “Component”.
YES
Is a COMPONENT video signal input to pins (1)/PC_R_COM,
(2)/PC_G_COM, (3)/PC_B_COM of EXT3 (SC501)?
NO Check the setting of an external input device that connects with
EXT3.
YES
Is COMPONENT signal sent to pins (AJ17/PC_R_CM), (AJ16/
PC_G_CM) and (AJ15/PC_B_CM) of IC3302?
NO Check the line between SC501 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT3] No picture on the display (10)
Does not the picture of the DVI (ANALOG) video signal input to EXT3 (15pin-D-SUB terminal) go out?
Is it selected “PC (RGB)” by the Audio setup under Menu-Setup-
Option-Input terminal setting - Input select?
NO Set the “PC (RGB)”.
YES
Are the video signal and the synchronized signal input from pin
(1, 2, 3)/(PC_R, G, B), (14 and 13)/(V, H.Sync) of EXT4 (SC501)?
NO Check the connection and setup with the external DVI devices.
YES
Are the video signal and the synchronized signal input from pins
(AK17/PC__R) (AK16/PC__G) (AH15/PC__B) and (AK14/
PC_HSYNC) (AJ14/PC_VSYNC) of IC3302 (Digital AV decode &
Main CPU)?
NO Check the line between SC501 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-60LE822E and is the answer not in the manual?

Sharp LC-60LE822E Specifications

General IconGeneral
Power supply typeAC
Power consumption (standby)0.20 W
Power consumption (typical)100 W
Child lockNo
Plug and PlayYes
Audio formats supportedAAC
Video formats supportedH.264, MPEG4
Display diagonal60 \
Display technologyLCD
Native aspect ratio16:9
Native refresh rate100 Hz
Viewing angle, horizontal176 °
Internal memory8000 MB
Audio (L/R) in0
HDMI ports quantity4
SCART ports quantity1
Product colorBlack
LED indicatorsStand-by
Panel mounting interface400 x 400 mm
Remote control typeGA841WJSA
RMS rated power20 W
Number of speakers2
Tuner typeAnalog & digital
Analog signal format systemNTSC, PAL, SECAM
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)368 mm
Width (with stand)1439 mm
Height (with stand)975 mm
Weight (with stand)51000 g
Depth (without stand)40 mm
Height (without stand)913 mm

Related product manuals