EasyManua.ls Logo

Sharp LC-60LE925X - Preparation; Protection against Overturning

Sharp LC-60LE925X
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Cup hook
(commercially available)
Wall
Clamps (supplied)
Affi x the TV to the wall or a
pillar using extra strong ties
and cup hooks.
Affi x the 2 clamps (supplied)
to the product.
1
2
Tie (commercially available)
View from the top
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
Preparation
Insert commercially available screws in the
holes of the restraining brackets from the top
and tighten the screws to secure the TV to the
table.
Use commercially available screws of the proper
size to fi rmly secure the TV.
3
Fixing the TV to the table
Attach the supplied restraining brackets to the
stand with two supplied screws.
Place the TV on the soft cushion.
1
2
CAUTION
As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should
be set where it will not be overturned.
Be sure to use at least two people when moving the TV.
Stand
Restraining brackets (supplied)
Screws
(Supplied)
Screws
(Commercially
available)
Restraining brackets (supplied)
Soft cushion
60LE925X_en_au.indd 960LE925X_en_au.indd 9 2010/09/01 16:27:332010/09/01 16:27:33

Table of Contents

Related product manuals