67
Selecting the picture size
Press WIDE.
• The WIDE MODE menu displays.
1
Press WIDE
or
a
/
b
to select a desired item
on the menu.
2
(Example)
You can select the picture size as illustrated below.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in 3D
mode.
Connecting a PC
a
Picture size images.
or
Displaying a PC image on the screen
Using Wide mode on the menu screen
Press
b/c/d
to select “Option”.
Press MENU and the MENU screen displays.
1
3
Press
a
/
b
to select “Wide mode”, and then
press ENTER.
5
2
Press c/d to select “Setup”.
4
Press
a
/
b
to select “Option for view”, and
then press ENTER.
Input Signal CinemaNormal
1024
g
768
For viewing wide
screen programs. The
top and bottom of
the image is slightly
cropped.
Keeps the original
aspect ratio in a full
screen display.
Full Dot by Dot
An image fully fi lls the
screen.
Detects the resolution
of the signal and
displays an image
with the same number
of pixels on the
screen.
Input Signal
Full
An image fully fi lls the
screen.
Detects the resolution
of the signal and
displays an image
with the same number
of pixels on the
screen.
1360
g
768
Normal
Keeps the original
aspect ratio in a full
screen display.
WIDE MODE
Normal
Cinema
Full
Dot by Dot
WIDE MODE
Normal
Cinema
Full
or
WIDE MODE
Normal
Full
Dot by Dot
Dot by Dot
60LE925X_en_au.indd 6760LE925X_en_au.indd 67 2010/09/01 16:34:142010/09/01 16:34:14