Sharp LC-60LE925X - Removing the Stand; Mounting the TV on the Wall

Appendix
NOTE
• To attach the stand, perform the above steps in reverse
order.
• As the TV is very heavy, be careful when moving it.
Mounting the TV on the wall
To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the
TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
Removing the stand
For wall mounting with the optional bracket (AN-52AG4) remove the stand.
Before setting TV on the wall.
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
2
1
87
1
2
3
Detach the stand from the TV. (Hold the stand so it
will not drop from the edge of the base area.)
Unfasten the 4 screws used to secure the stand in
place.
1
2
1
Unfasten the screws at the 3 locations on the
rear of the stand cover.
2
Remove the stand cover.
60LE925X_en_au.indd 8760LE925X_en_au.indd 87 2010/09/01 16:34:532010/09/01 16:34:53