33
PRINTING A CARBON COPY (Carbon Copy)
This function is used to print an additional copy of the
print data on paper that is the same size but from a
different paper tray.
For example, if carbon copy print is selected when
standard paper is loaded in tray 1 and coloured paper is
loaded in tray 2, a print result similar to a carbon copy
slip can be obtained by selecting the print command only
once. As another example, if standard paper is loaded in
tray 1 and recycled paper is loaded in tray 2, Carbon
Copy can be used to simultaneously print one copy for
presentation and one copy as a duplicate.
Selecting the settings:
(This function can be used when the PCL6, PCL5c, or PS printer driver is used.)
A
A
A
A
The settings are on the
[Paper] tab.
Select [Carbon Copy] and
click the [Settings] button.
Select the carbon copy settings.
Select the tray for the "Top Copy" and then
select the tray for the carbon copy (or
copies) in "Carbon Copy".
When the bypass tray is selected, be
sure to select the "Paper Type".
To Next Page
Loading...
Need help?
General
