Sharp MX-2300N Guide - SCANNING MANY ORIGINALS AT ONCE (Job Build)

102
7
Specify the destination.
• Touch the one-touch key for the desired destination and then
the [To] key.
☞ SPECIFYING DESTINATIONS IN THE ADDRESS BOOK
(page 19)
• To specify a destination address in a global address book,
touch the [Global Address Search] key and specify the
address.
☞ CALLING UP A DESTINATION FROM A GLOBAL
ADDRESS BOOK (page 24)
8
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ) to scan the front side
of the card.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key ( ).
9
Turn the card over and press the
[COLOUR START] key ( ) or the
[BLACK & WHITE START] key ( ) to
scan the reverse side of the card.
Press the same [START] key that was used to scan the front
side.
10
Touch the [Read-End] key in the touch
panel.
The ratio cannot be specified and the Rotation Sending Setting cannot be selected.
To cancel the card shot...
Touch the [Cancel] key in the screen of step 5.
AAA AAA
CCC CCC
EEE EEE
BBB BBB
DDD DDD
FFF FFF
ABCD EFGHI JKLMN OPQRST UVWXYZ
1/1
Frequent Use
To
Sort Address
Address Review
Condition
Settings
Global
Address Search
BccCc
or
or
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End]
Read-End