82
GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
Press the [JOB STATUS] key.
2
Select the job to which you wish to give
priority.
(1) Touch the mode key of the job to be given
priority.
(2) Touch the key of the job to be given priority.
(3) Touch the [Priority] key.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
JOB STATUS
Address Set Time
Complete
Priority
Stop/Delete
Internet Fax
Job Queue
Broadcast0001 10:00 11/01 000/010 Connecting
AAA AAA 10:05 11/01 000/005 Waiting
BBB BBB 10:22 11/01 000/004 Waiting
CCC CCC 10:30 11/01 000/010 Waiting
1/1
Pages Status
Detail
Fax JobScan to
Print Job
(1) (1)(3)(2)
To Next Page
Loading...
Need help?
General
