22
USING A SEARCH NUMBER TO SPECIFY A
DESTINATION
A destination stored in the Address Book can be called up using the key. This can be done in the base screen of
any of the modes or in the Address Book screen.
1
Touch the key.
2
Enter the 3-digit search number of the
address with the numeric keys.
When the 3-digit search number is entered, the stored address
is called up and specified as a destination.
• The search number is the number that was stored when the destination was stored in the address book.
• If you do not know the search number, print the one-touch address list using "Sending Address List" in the system
settings.
• When entering search numbers such as "001" and "011", "0" can be omitted. For example to enter "001", enter "1"
and touch the key or the [Next Address] key.
If an incorrect search number is entered...
Press the [CLEAR] key ( ) to clear the number and enter the correct number.
Quick File
File
Special Modes
Address Entry
Resend
Scan
Auto
Send
Ready to send.
Address Book
Scan
Mode Switch
Image
Settings
Send Settings
A4
To Next Page
Loading...
Need help?
General
