EasyManua.ls Logo

Sharp MX-2300N Guide - SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission)

Sharp MX-2300N Guide
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
7
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ).
Scanning begins.
When scanning finishes, place the next two open pages and
press the [COLOUR START] key ( ) or the [BLACK &
WHITE START] key ( ). Repeat until all pages have been
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key ( ).
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
To erase shadows caused by the binding of a book or other bound document, use the erase function. (Centre Erase and
Edge + Centre Erase cannot be used together.)
To cancel the dual page scan setting...
Touch the [Dual Page Scan] key in the screen of step 4 so that it is no longer highlighted, and touch the [OK] key.
or

Table of Contents

Related product manuals