MX-5001N EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 2
B. AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS
No. Name function/Operation
1 Paper feed roller This roller rotates to automatically feed the original.
2 Document feeding area cover Open this cover to remove an original misfeed or clean the paper feed roller.
3 Original guides These help ensure that the original is scanned correctly. Adjust the guides to the width of the original.
4 Document feeder tray Place originals in this tray. 1-sided originals must be placed face up.
5 Original exit tray Originals are delivered to this tray after scanning.
6 Scanning area Originals placed in the document feeder tray are scanned here.
7 Original size detector This detects the size of an original placed on the document glass.
8 Reversing tray During scanning of a 2-sided original, the original is temporarily output to this tray in order to be turned over for
scanning of the reverse side.
9 Document glass Use this to scan a book or other thick original that cannot be fed through the automatic document feeder.
(2)
(8)
(9)
(3) (4) (5) (6) (7)(1)
(2) (3) (4) (5)
When using the
MX-4101N/5001N.
1
: Oct. 24 2008
1
To Next Page
Loading...
