Sharp MX-B401 User Manual

2-86
COPIER
Contents
1
Insert the originals face up in the
document feeder tray.
Place the originals with the sides that are the same length
aligned on the left.
2
Select the special modes.
(1) Touch the [Special Modes] key.
☞SPECIAL MODES (page 2-38)
(2) Touch the keys to switch through the
screens.
(3) Touch the [Mix Size Original] key so that it
is highlighted.
(4) Touch the [OK] key.
You will return to the base screen of copy mode.
3
Press the [START] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
To cancel the mixed size original setting...
Touch the [Cancel] key in the screen of step 2.
System Settings (Administrator): Original Feeding Mode
The original feeding mode can be set to always scan mixed size originals.
8-1/2" x 14"
(8-1/2" x 11")
8-1/2" x 11"
(5-1/2" x 8-1/2")
A4
A5
Place with the sides that
are the same length
aligned on the left.
Place with the sides that
are the same length
aligned on the left.
Inch
AB
Special Modes
2
2
OK
Proof Copy
Business
Card Scan
Slow Scan
Mode
Mixed Size
Original
(4)(2)(3)

Sharp MX-B401 Specifications

General

Brand	Sharp
Model	MX-B401
Category	All in One Printer
Language	English