60
MAC OS X
X Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote
location, this function can be used in place of the fax function to print a higher
quality image than a fax. If you wish to use the IPP function, follow these steps
to select the PPD file when configuring the printer driver (step 14 on page 56).
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 to 10.5.5, click the [IP] icon.
(2) Select [Internet Printing Protocol] in "Protocol". Enter the address
of the machine (IP address or domain name) and the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and click the PPD file of your
model.
If you are using Mac OS X v 10.5 to 10.5.5, select [Select a driver to use] from
"Print Using" and click the PPD file for your model.
(4) Click the [Add] button.
If you are using Mac OS X v 10.5 to 10.5.5, the "Installable Options" screen will
appear. Make sure that the settings are correct and click the [Continue] button.
☞ Checking the IP address of the machine (page 8)
v10.4.11, v10.5 - 10.5.5
(1)
(2)
(4)
(3)
!mxb401_us_ins.book 60 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
Need help?
General
