59
MAC OS X
16
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the machine configuration is detected
and automatically configured. Check the configured settings to make sure they are
correct.
(1) Select [Installable Options].
If you are using Mac OS X v10.5 to 10.5.5, it does not appear.
(2) Select the options that are installed on the machine.
(3) Click the [Apply Changes] button.
If you are using Mac OS X v10.5 to 10.5.5, click the [OK] button.
(4) Click to close the window.
This completes the configuration of the printer driver.
You can check the options that are installed on the machine by printing out the
"All Custom Setting List" in the system settings. (However, note that "Input Tray
Options" must be set to the number of trays on the machine.) Follow these steps
to print out the "All Custom Setting List": Press the [SYSTEM SETTINGS] key,
touch the [List Print (User)] key, and then touch the [Print] key of "All Custom
Setting List".
(1)
(3)
(2)
(4)
!mxb401_us_ins.book 59 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
