47
CHANGING THE PORT
When using the machine in a Windows environment, follow the steps below to
change the port when you have changed the IP address of the machine or have
installed the PC-Fax driver when the machine is connected with a USB cable.
If the machine is being used on an IPv6 network, follow the steps below to
change the port.
1
Click the [Start] button ( ), click [Control Panel], and then click
[Printer].
• In Windows XP/Server 2003, click the [start] button and then click [Printers and
Faxes].
• In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and
then click [Printers].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the machine.
(2) Select [Properties].
If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click
the [start] button, click [Control Panel], click [Printers and Other Hardware], and
then click [Printers and Faxes].
!mxb401_us_ins.book 47 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
Need help?
General
