Sharp MX-B401 User Manual

7-34
SYSTEM SETTINGS
Contents
Network Settings
Printer Settings
Item Factory default setting Page
■ Network Settings
7-67
● IPv4 Settings DHCP 7-67
● IPv6 Settings Disabled 7-67
● Enable TCP/IP Enabled 7-67
● Enable NetWare Enabled 7-67
● Enable EtherTalk Enabled 7-67
● Enable NetBEUI Enabled 7-67
● Reset the NIC – 7-67
● Ping Command – 7-67
Item Factory default setting Page
■ Printer Settings
7-68
● Default Settings 7-68
X Prohibit Notice Page Printing Enabled 7-68
X Prohibit Test Page Printing Disabled 7-68
X A4/Letter Size Auto Change Disabled 7-68
X Print Density Level 3 7-68
X Bypass Tray Settings 7-68
 Enable Detected Paper Size in Bypass Tray Disabled 7-68
 Enable Selected Paper Type in Bypass Tray Enabled 7-68
 Exclude Bypass-Tray from Auto Paper Select Disabled 7-68
X Job Spool Queuing Enabled 7-68
● Interface Settings 7-69
X Hexadecimal Dump Mode Disabled 7-69
X I/O Timeout 60 sec. 7-69
X Enable USB Port Enabled 7-69
X USB Port Emulation Switching Auto 7-69
X Enable Network Port Enabled 7-69
X Network Port Emulation Switching Auto 7-69
X Port Switching Method Switch at End of Job 7-69

Sharp MX-B401 Specifications

General

Brand	Sharp
Model	MX-B401
Category	All in One Printer
Language	English