17
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
X
Installation by specifying the machine's address
When the machine cannot be found because it is not powered on or otherwise,
installation is possible by entering the name (host name) or IP address of the machine.
If the machine is being used on an IPv6 network, after you have installed the
software as explained below, change the port as explained in "Changing to a
Standard TCP/IP Port" (page 49).
When the software selection screen appears in step 6 of "OPENING THE
SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 10),
perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM.
*The above screen appears when using the "Disc 1" CD-ROM.
2
Click the [Custom installation] button.
!mxb401_us_ins.book 17 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
