38
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
4
Click the [Auto Configuration] button.
The settings are automatically configured based on the detected machine status.
*The screen shows the PCL6 printer driver.
5
Configure the image of the machine.
An image of the machine is formed in the printer driver configuration window based
on the options that are installed.
(1) Select the options that are installed on the machine.
(2) Click the [OK] button.
If the machine is being used on an IPv6 network, you must configure the options
manually as explained in "If automatic configuration fails" (page 39).
To cancel the image settings, click the [Cancel] button.
(1) (2)
!mxb401_us_ins.book 38 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
