49
CHANGING THE PORT
5
Create the new port.
(1) Enter the machine's IP
address.
☞ Checking the IP
address of the machine
(page 8)
(2) Make sure that [LPR] is
selected.
(3) Make sure that [lp] is
entered.
(4) Click the [OK] button.
6
Click the [Close] button in the screen of step 4.
In Windows 98/Me, this step is not required. Go to the next step.
7
Make sure the created printer port is selected in the printer properties
window and then click the [Apply] button.
X Changing to a Standard TCP/IP Port
If the machine is being used on an IPv6 network, change the port to a port
created using the operating system's "Standard TCP/IP Port".
1
Follow steps 1 to 3 of "CHANGING THE PORT" (page 47).
(4)
(1) (2) (3)
!mxb401_us_ins.book 49 ページ ２００９年１月７日 水曜日 午後３時４２分
To Next Page
Loading...
