16
REPLACING SUPPLIES AND MAINTENANCE
2
Release the used toner collection container.
(1) Make sure that the part indicated in the illustration has
stopped in the correct position.
After machine operation stops suddenly due to a power outage or other
reason, the part will stop in the correct position unless an attempt was
made to remove the toner collection container.
If the part has not stopped in the correct position, close the front cover, turn
on the power, and then follow the correct procedure to turn off the power.
After the power has been turned off correctly, start again from step 1.
(2) Turn the toner collection container lock lever to the
right until it is horizontal.
(3) Tip the toner collection container forward.
Grasp the top right of the toner collection container with your right hand and
support the bottom left with your left hand, and slowly tip the container toward you.
Correct
position
Incorrect
position
mxb401_us_saf_02.fm 16 ページ ２００９年１月８日 木曜日 午前９時４５分
To Next Page
Loading...
