MX-C301W ONLY:
1. Using a PC, copy the Watermark Update firmware onto the root of a USB memory device:-
Caution: When copying the Watermark firmware/directories onto the USB drive,
do not change the folder hierarchy or files.
2. Insert the USB memory device into a USB port on the machine and execute
Simulation 49-05 [WATER MARK UPDATE]:-
Note: “If no USB device is detected, an error message will be displayed.
3. Select the Directory containing the Watermark update files:-
4. The current and updated version should now be displayed. Press Execute to commence
upgrade:-
To Next Page
Loading...
Need help?
General
