Sharp MX-C528F

Menu item Description
Printer Emulations
Emulator Security
Page Timeout
0–60 (60*)
Set the page timeout during emulation.
Printer Emulations
Emulator Security
Reset Emulator After Job
O*
On
Reset the emulator after a print job.
Printer Emulations
Emulator Security
Disable Printer Message Access
O
On*
Disable access to printer message during emulation.
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Set fax to enter Sleep mode whenever the printer determines
that it must.
Fax Configuration
Fax Storage Location
NAND
Disk*
Set the storage location for all faxes.
Note: This menu item appears only when a hard disk or an
ISD is installed.
Print Configuration
Black Only Mode
O*
On
Print non‑copy jobs in grayscale.
Print Configuration
Color Trapping
O
1
2*
3
4
5
Enhance the printed output to compensate for misregistration
in the printer.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 113