Sharp MX-C528F - Adding Available Options in the Print Driver; Installing Hardware Options

Adding available options in the print driver
For Windows users
1 Open the printers folder.
2 Select the printer you want to update, and then do either of the following:
• For Windows 7 or later, select Printer properties.
• For earlier versions, select Properties.
3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
4 Apply the changes.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2 Navigate to the list of hardware options, and then add any installed options.
3 Apply the changes.
Installing hardware options
Available internal options
• Intelligent storage drive (ISD)
– Fonts
• Simplified Chinese
• Traditional Chinese
• Japanese
• Korean
• Arabic
– Mass storage
• Printer hard disk
• Licensed features
– IPDS
– Bar Code
• Wireless module
– MarkNet
TM
N8370
– MarkNet N8372
• Trusted Platform Module (TPM)
Notes:
• An ISD or a hard disk is required to activate formsmerge and other features.
• Some IPDS features require an ISD or a hard disk.
Set up, install, and configure 51